 |
|
|
|
Outside Mounting Instructions
A little more difficult to measure than an Inside Mount, but still quite
simple and performed by our customers every day.
 Width
- If the 1" flat surface is the area immediately outside of the window
jamb, just measure the width of the jamb and add 2" (1" for each
side). If the flat area is not immediately adjacent to the window jamb,
measure between the outside points where you are intending for the shutter
frame to rest.
Height - If you have a window sill, you will not use a bottom
frame piece, so only the top frame piece will overlap you casing, therefore
your height measurements will only be 1" greater than the opening’s
height. If you do not have a window sill, measure in the same way as you
did the width making the height measurement 2" greater than the window
opening size itself.
Record these dimensions on our measurement
form and fax them to us so that we can create a detailed quotation for
your genuine Signature Shutters. Upon receiving this quotation you can either
order as stated, or engage in a dialog with us where we can customize your
order in more detail with options such as divider rails, split pullbars,
louver options, frame options and more.
The blue/shaded area is the inner 1" of casing, which the shutter
frame covers over. |
 |
|
|
